Miller Bobcat 265 Engine Driven Welder Generator (Kohler), With Remote Start/Stop - 907826

Miller® Bobcat™ 265 Engine Driven Welder with Remote Start/Stop 907826

The Miller® Bobcat™ 265 engine driven welder is a 265 amp DC welder and 11,000 watt AC generator.  Continuous 9,500 watts of auxiliary power are available at all times, even while operating at 100% welding output.  Auxiliary power outlets include two 120 volt duplex w/GFCI, one 240 volt receptacle with circuit breaker, and one 120/240 volt receptacle with circuit breaker.  Weighing in at just 385 pounds, the Bobcat 265 is 100 pounds lighter and 13% smaller than previous Miller Bobcat models.  It is specifically designed to take up less room in your pick up truck or UTV.  Miller’s exclusive AutoSet™ technology allows you to access pre-programmed welding parameters, based on metal thickness and welding process, for easy set up.  You can also fine tune your output amperage and voltage manually, to suit your welding style.

The Bobcat 265 is powered by a twin cylinder Kohler® 23.5 horse power CH730 gasoline engine, and has an 11 gallon fuel capacity.  A large LCD screen displays welding output,  maintenance intervals. engine hours and fuel level.  The Bobcat 265 provides both CC and CV welding output for stick, DC TIG and MIG welding operations. Need to weld aluminum using a Miller Spoolmatic® or Spoolmate™ 200 spool gun The Bobcat 265 features a direct 10-pin receptacle, no need for a WC-24 weld control. This welder comes complete with Miller’s True Blue® 3 year warranty.

Processes

• Stick Welding (SMAW)
• Flux Cored Welding (FCAW)
• MIG Welding (GMAW) – with OPTIONAL wire feeder
• DC TIG Welding (GTAW)
• Air Plasma Cutting and Gouging with optional Spectrum® plasma cutter

Applications

Industrial Applications

Maintenance

Repair

Farm/Ranch Applications

Fabrication

Structural Steel Work

Use as a Stand-Alone Generator

Features

• Easy-To-Use
  AutoSet™ technology features preset output volts/amps based on your application.
  Use preprogrammed weld parameters or adjust manually to suit your welding style.
• Full Generator Power While Welding
  Get full auxiliary power with no arc interference, for superior weld quality
  Jobsite tools can run without interruption, helping you get more done.
• Remote start/stop
  Easily turn your Bobcat welder on and off remotely, so it only runs when you need it.
  Helps reduce fuel and maintenance costs.

• Smooth Welding Arc Performance
  Get unparalleled welding performance with 7018 and 6010 stick electrodes.
  Arcs start easily and create less spatter, delivering more of the productivity you need.
• Lighter and Smaller
  Weighs less than any other engine-driven welder in its class.
  It is over 100 pounds lighter and 13% smaller than previous models.
  Bobcat 265 is easier to move and takes up less space on trucks.
• Large LCD Display
  Clearly shows output, fuel level, engine hours and maintenance intervals.
• Direct Spool Gun Connection
  Plug a Spoolmatic® or Spoolmate™ 200 spoolgun directly into the Bobcat 265 – no adapter needed.