Rugged and reliable engineering
• Consistent feeding over long conduit runs
• Handles large-diameter wires (up to 3/32 in. (2.4 mm) solid or .120 in. (3.2 mm) cored wire), well beyond the competition’s 5/64-in. capacity
• Gun adapters provide superior electrical connections reducing voltage drops and simplifying connections
• Wire drive circuit board is encapsulated for maximum protection from the elements
Superior process control
• Digital preset for voltage and wire feed speed
• Save repeated procedures in up to four user memories
• Process limits can be set and passcode secured
• Displays actual voltage and current while welding
Safety with every process
• Single model feeders can be ordered with an electrically isolated stud for arc gouging operations
• Dual model can be ordered with a Power Path™ contactor that electrically isolates the non-active wire drive and gun
• User selectable wire retract function physically retracts the wire back into the nozzle to prevent operator injury
Advanced MaxTrac® wire drive design
• Rugged cast aluminum feed plate protects wire and ensures consistent wire feeding
• Patented tool-less drive rolls make adjustments and maintenance quick and easy
• Patented tool-less split wire guides ensure uninterrupted feed and prevents birdnesting
Modular design provides flexibility of configurations
• Configure for single, dual, bench or boom setups (convert as workspace needs change)
• Two available wire reel stands; standard (up to 44-lb. spools) or heavy duty (up to 60-lb. coils or spools)
• Built-in interface for hard automation
SOLID WIRE SIZE RANGE | .025 – 3/32 in (0.6 – 2.4 mm)
.025 – 1/16 in (0.9 – 1.6 mm) .025 – 1/16 in (0.9 – 1.6 mm) |
CORED WIRE SIZE RANGE | .035 – .120 in (0.9 – 3.0 mm)
035 – 5/64 in (0.9 – 2.0 mm) 035 – 5/64 in (0.9 – 2.0 mm) |
WIRE SPEED RANGE IPM (M/MIN) | Standard Speed / Installed 20 Tooth Pinion Gear:
35 – 500 inch/min (0.9 – 12.7 m/min) 50 – 750 inch/min (1.3 – 19.0 m/min) can be achieved by installing the 30 tooth pinion gear |
DIMENSIONS (H X W X D) | 16.5 in x 15.5 in x 28 in (419 mm x 394 mm x 711 mm) |
NET WEIGHT | 62.00 (28.12 kg) |
- Gun adapter Standard #2 – #4
- Inlet bushing K3929-1
- Digital Display Meter – Amps
- Wire Feed Speed Knob
- Optional Gouge Stud (Not Shown)
- Trigger Mode Button Cold Feed/2-Step/4-Step/Spot
- Procedure Set Up/Memory Buttons
- Feeder/Gouge Stud Output Selection Button
- Thermal Overload Condition Led
- Digital Display Meter – Voltage
- Cold Feed/Gas Purge Control
- Voltage Control
- Timer Mode Button Preflow/Spot/Burnback/Postflow
- Sequence Button
- Cold Feed Reverse Button
- Cold Feed Forward Button
- Gas Purge Button
- Trigger Connector