, , SKU: 907809

Miller Dimension™ 650 575V ArcReach™ Multiprocess Welder - 907809


-

Developed for harsh environmental conditions and output requirements that range from power-intensive to precise. ArcReach provides remote control of the power source without a cord – saving time and money.

$9,408.00

Available offers

$100
Orders above $3000
View applicable products
Click to copy
100off
0 0
Days
0 0
Hours
0 0
Minutes
0 0
Seconds
ArcReach Technology
Exclusive ArcReach technology uses the existing weld cables to communicate changes in voltage settings. With an ArcReach system, voltage and wire-feed-speed controls are conveniently located at the operator’s fingertips – not back at the power source
Increased Productivity
More arc-on time and reduced exposure to workplace hazards for operators can be realized using ArcReach because less time is spent going back to the welding power supply to set process and amperage.
Auto-Process Select™
System automatically returns to Dimension setting when ArcReach communication is terminated. For example, if the Dimenison is set to gouging at 650 amps and an ArcReach feeder is connected, the Dimension will go to a MIG/FCAW process. If the feeder is disconnected, the Dimension will go back to its previous setting (gouging at 650 amps).
Remote Override of Dimension
When an ArcReach feeder is connected to an Dimension the feeder has full control and the Dimension controls are disabled. While under ArcReach control, process and V/A adjustments are locked out, preventing accidental changes by personnel other than the welding operator.
Fleet Compatibility
ArcReach-equipped power sources and wire feeders work with non-ArcReach equipment; however the complete ArcReach benefit is only realized with the ArcReach system. This allows you to start investing in ArcReach one power source, one wire feeder at a time.
ROI Calculator
See how upgrading to ArcReach technology can increase your productivity and profits.
Rugged and Durable Inside and Out
All aluminum construction helps the machine resist corrosion for long life.Exclusive protection input inductor protects machines performance and reliability from “dirty” input power.Wind Tunnel Technology™. Internal air flow that protects electrical components and PC boards from dirt, dust, debris… greatly improving reliability.Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Smaller and lighter
Reduced size and weight results in an easier-to-handle package that exceeds the welding performance of larger, heavier machines. The Dimension 650 uses 40 percent less floor space than previous model.
Power efficient
High electrical efficiency and excellent power factor mean that you can get more welding done using less power.On 460 VAC, the new Dimension 650 draws only 43 amps at rated load and can operate on a 50-amp service. Four new machines can work at maximum loads simultaneously on a 200-amp service, drawing less amperage than three previous models.
Improved Arc Performance
High-quality performance from power-intensive to precise.Gouging mode provides 800 amps of usable power, a full 650 amps of power at 100-percent duty cycle. Perfect for heavy gouging with 3/8-inch carbons.Three wire modes (GMAW/FCAW/SAW) for simplified setup and optimized arc performance. Solid and flux-cored wires with gas offer exceptional short-arc MIG precision to weld thin metals with less risk of distortion or burn-through, and premium Flux-Cored welding with gas. Flux-Cored (self-shielded) welding performance is exceptional, especially with wires commonly found in infrastructure construction. Sub Arc mode provides capability to retrofit into nondigital Sub Arc applications. Excellent Stick and Lift Arc TIG performance.Arc control is beneficial when welding with Stick and solid wires for easier fine-tuning of tough-to-weld materials and out-of-position applications.

PROCESSES

Air Carbon Arc Cutting and Gouging (CAC-A)
Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
Submerged Arc (SAW)
TIG DC (GTAW-DC)

GENERAL SPECIFICATIONS

Title Dimension™ 650 575V ArcReach™
Industries Interests Manufacturing
Heavy Equipment Manufacturing
Railcar
Construction
Infrastructure
Shipbuilding
Fabrication
Weldable Metals Specialty Metals
Stainless Steel
Steel
Input Voltage 575 V
Rated Carbon Diameter 3/8 in (9.5 mm)
Input Phase 3-Phase
Input Hz 60 Hz
Current Type DC
Max Open Circuit Voltage 87 VDC
Portability Lift Eye (Standard)
Running Gear / Cart (Optional)
Weld Output CC/CV
Net Width 16.687 in
Net Height 28.187 in
Net Length 31.675 in
Net Weight 158 lbs
Warranty 3 Years
Miller’s True Blue Warranty
Gtin REPLACED 907845 SKU: 907809 Categories: , ,
Weight 158 lbs
Dimensions 31.625 × 16.687 × 28.187 in