, , SKU: 907791

Miller Bobcat™ 225 with Remote Start/Stop, GFCI - 907791

Availability:

Out of stock


-

The Miller Bobcat 225 welder/generator is great for stick welding and generator power. Designed for farm/ranch, maintenance and repair operations, work trucks and use as a stand-alone generator. Easily turn your machine on and off remotely, so it only runs when you need it. Get more done with each tank of fuel, extend time between maintenance intervals and work without the hassle of walking back to your machine.

$6,815.00

Out of stock

Miller Bobcat™ 225 With GFCI & Remote Start/Stop 907791

This item has been discontinued and replaced with: 907824

 


The Miller Bobcat™ 225 GFCI & Remote Start/Stop features 120 volt duplex receptacles with Ground Fault Circuit Interruption protection for operation in areas where state or federal law requires GFCI. Remote Start/Stop allows you to start and shut down your Bobcat 225 with wireless fob, saving you time and money. Remote fob is rugged, water resistant and comes with a three year warranty. Wireless control beeps and lights up to confirm that the Bobcat’s engine has started or has been shut down. Welder comes complete with one wireless start/stop fob. Additional fobs are available for order.

 

The Bobcat 225 is is a 225 amp AC/DC welder and 11,000 watt generator. It is powered by a twein cylinder Kohler 23.5 horse power gasoline engine and has a 12 gallon fuel capacity for longer run times. It provides both CC and CV welding output, which means your can MIG, TIG and stick weld, with the proper accessories. The redesigned Miller Bobcat 225 is quieter to operate, smaller and lighter and easier to maintain than previous models.

It comes complete with Miller’s True Blue® 3 year warranty.

NEW Remote Start/Stop

Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 225 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.

  • Simple: One button to start and stop the Bobcat.
  • Durable: Tough and water-resistant with a three-year warranty.
  • Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.

Savings on Fuel and Maintenance

  • A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.

Jobsite Safety

  • The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.

Hands-Free Starting

  • Carbureted Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands free. (eChoke is a trademark of Kohler Co.)

Small, Light Design

  • Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.

Designed for Reliability

From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:

  • Copper windings and iron generator components for a quality-built machine
  • Lugged — not soldered — heavy internal leads for better field durability
  • Superior cooling technology for maximum performance and engine life
  • Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
  • Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability

Easy Maintenance

With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
  • Oil checks that can be performed easily through the top of the machine by the access door
  • Toolless panels that allow for quick access
  • Single-side fuel fill and oil drain/filter
  • Remote Start/Stop fob

 

NOT INCLUDED

  • Weld leads

PROCESSES

Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
TIG AC (GTAW-AC)
TIG DC (GTAW-DC)

GENERAL SPECIFICATIONS

Title Bobcat™ 225 with Remote Start/Stop, GFCI
Industries Interests Fabrication
Farm and Ranch
Infrastructure
Work / Service Trucks
Weldable Metals Aluminum
Stainless Steel
Steel
Current Type AC / DC
Portability Lift Eye (Standard)
Running Gear / Cart (Optional)
Trailer (Optional)
Net Width 20 in
Net Height 28 in
Net Length 40.5 in
Net Weight 485 lbs
Gtin replaced 907824 SKU: 907791 Categories: , ,
Weight 485 lbs
Dimensions 40.5 × 20 × 28 in

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Miller Bobcat™ 225 with Remote Start/Stop, GFCI”

There are no reviews yet.